Rewiring in Davenport, IA
Rewiring is decided by what is in the walls, not by the year on the assessor’s record. In Davenport we still open boxes holding cloth-insulated conductors that crumble when they are moved, ungrounded runs feeding modern electronics, and knob-and-tube left live behind a later remodel. We pull new cable to the devices that need it, a room at a time or the whole house, cutting as few holes as the route allows.
What this means in Davenport
Plaster and lath changes the plan. Much of the older housing in Davenport is plaster over lath with balloon framing behind it, which is a nuisance to patch and a help to fish, because an open stud bay can run from the basement right through to the attic. We work the routes from those two ends wherever the framing allows, so most of the new cable never needs a wall opened at all. Rewiring is permit work here, and the permit comes out in our name as the licensed contractor.
Part of the electrical work we do in Davenport, IA, and of Rewiring across the Quad Cities.
Wiring we replace
- Knob-and-tube, where every splice is open and nothing is grounded
- Cloth-jacketed cable whose insulation cracks off the copper when it is moved
- Ungrounded two-wire circuits feeding three-prong outlets that were swapped in later
- Aluminum branch circuits at receptacles, switches and fixtures
- Lamp cord and extension cable run inside walls by a previous owner
- Circuits stretched across an addition until one breaker feeds half the house
Rewiring in Davenport: questions
Do we have to move out while our Davenport house is rewired?
Almost never. We take one area at a time and leave the rest of the house energised at the end of each day, so heat, refrigeration and lighting keep working throughout.
Can knob-and-tube in a Davenport home be left in place?
Not where it is still carrying load, and not buried under insulation. If part of the house has already been rewired, we replace what is left of the old runs rather than tying new cable into them.
Does rewiring a Davenport home mean tearing out plaster?
Some openings are unavoidable, but far fewer than people expect. Most runs go through the basement, the attic and open stud bays, and the holes we do cut are small and placed where they patch cleanly.
More electrical work in Davenport
Rewiring in nearby cities
Rewiring in Davenport?
24-hour emergency service available